Frequently asked questions
It depends on coolant condition. The coolant shall be changed when there is color change, bad smell, or other bad condition.
The efficiency of hydraulic system is influenced by oil temperature. Please run empty cycles on the machine for some time to raise the oil temperature.
Please use a sand paper or hand polisher to clear the burr. The precision of the puller will remain same.
Both-hand start bottoms. Other safety accessories are optional.
[Broaching Machine] What is the standard safety accessories on electromechanical table up broaching machines?
They are built as per CE standard.
It depends on how difficult to make the tools. It is 45 – 75 days in general, but it could be longer for bigger or complicated tools.
It requires many process to make good broaches. Each process has to take enough time for keeping quality.
It is optional. We can make poka-yoke as per customer’s requirements.
[Broaching Machine] After broaching, if the work piece was not removed, the tool might hit the work piece during its return. How to prevent it?
The work piece sensor is included in standard accessories. If the work piece wasn’t removed after broaching, the machine will not run the return process.
Generally not. The work piece has to be well clamped during surface broaching. Therefore, the angle of broaching is better within 180 degree.
It is made as per hole diameter and broach tool size. The broach is stably held for one-side cutting.
Yes. The rotary table is used for reducing loading / unloading time to few seconds. It makes the broaching machine work in better efficiency.
[Broaching Machine] How many days does it take to learn how to operate and maintain the broaching machine?
It takes only 2 days (not including traveling time).
No. Broaching is for through holes only.
1. Screw Magnetic type is cheaper, it provides normal cleaning efficiency and only work on magnetic chips. 2. Magnetic type cost more, it provides better cleaning efficiency and only work on magnetic chips. 3. Scraper type is for non-magnetic chips.
Use Axisco’s CNC creep-feed surface grinder. It can do creep-feed grinding with forming wheels and rollers.
It is dia. 2.2 mm x 300 mm depth. The material is Titanium alloy.